Runco CL-810 CINEWIDE 用户手册
Runco CL-810 Series Owner’s Operating Manual
63
PRE
L
IMINAR
Y
Splash Screen Timer: Use the
or
button to set the Splash Screen Timer. This timer
controls how long the startup (ISF and Runco logo) image stays on-screen after you turn
on the projector. Select from 5 to 60 seconds, in 1-second increments. When finished,
press EXIT.
on the projector. Select from 5 to 60 seconds, in 1-second increments. When finished,
press EXIT.
ISF Enable: Use ISF Enable to control the display of the ISF logo on the CL-810 splash
screen upon power-up.
screen upon power-up.
Return to User OSD: To exit the ISF Calibration menu, use the up- or down-arrow keys
to highlight Return to User OSD and press ENTER.
to highlight Return to User OSD and press ENTER.
To return to the ISF Calibration menu, select it from the Main Menu, press ENTER twice,
then press MENU on the remote control. (You do not need to re-enter the passcode.)
then press MENU on the remote control. (You do not need to re-enter the passcode.)