Runco VX-2i 用户手册
Runco VX-2i Owner’s Operating Manual
29
Table 4-1. Aspect Ratio Settings
Aspect Ratio
Remote
Control
Key
Description
Anamorphic
ANA
The image is compressed
vertically, but anamorphic
software will appear properly
proportioned. This is best suited
for use with 16:9 DVDs and
HDTV programming.
vertically, but anamorphic
software will appear properly
proportioned. This is best suited
for use with 16:9 DVDs and
HDTV programming.
Standard 4:3
4X3
The input signal is scaled to fit in
the center of the 16:9 screen.
4:3 is the aspect ratio used by
computer monitors, standard
television programming and
most VHS video cassettes.
the center of the 16:9 screen.
4:3 is the aspect ratio used by
computer monitors, standard
television programming and
most VHS video cassettes.
Letterbox
LET
BOX
The image in the Letterbox
mode is stretched vertically; the
top and bottom portions are
“blanked off.” Letterbox is best
suited for LaserDisc movies or
non-anamorphic DVDs.
mode is stretched vertically; the
top and bottom portions are
“blanked off.” Letterbox is best
suited for LaserDisc movies or
non-anamorphic DVDs.
VirtualWide
V-WIDE
A 4:3 image is transformed into
a 16x9 image.
a 16x9 image.
Cinema
--
The image in the Letterbox
mode is enlarged to a 16x9
image and the upper and lower
portions are compressed.
mode is enlarged to a 16x9
image and the upper and lower
portions are compressed.
Virtualwide 2.35
--
A 2.35 image is stretched
vertically in both directions to fill
a 16:9 image. Virtualwide 2.35 is
available only on VX-2i
projectors equipped with the
CineWide option (secondary
anamorphic lens).
vertically in both directions to fill
a 16:9 image. Virtualwide 2.35 is
available only on VX-2i
projectors equipped with the
CineWide option (secondary
anamorphic lens).
Active Image Area
Active Image
Area
Active Image Area