Runco VX-2000d 用户手册

Table 3-1 gives a quick overview of the VX-2000d installation process. The sections 
following this one provide detailed instructions. 

 

1

Choose a location for the projector

2

Connect the DHD Controller to the projector

3

Connect signal sources to the DHD Controller

4

Connect external controller to RS-232 port (optional)

5

Connect other home theater components to 12-volt trigger 
outputs (optional)

6

Apply power to the projector 

7

For rear-screen and/or ceiling-mount installations, select 
the proper picture orientation 

8

Primary lens adjustments: projected image size (zoom), 
position (shift) and focus

9

Install CineWide anamorphic lens (optional)

10

CineWide lens adjustments: position, pitch (angle), 
geometry and focus

11

Projector calibration – Analog 1080i and 
lower-resolution signals: 
Adjust the following for Component SD input; save settings 
when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position

39 through 52

12

Repeat Step 11 for S-Video 1, S-Video 2, Composite 
Video, HD1 and HD2 inputs

13

Projector Calibration – Digital 1080i or 1080p signals:
Adjust the following for HDMI 1 and HDMI 2 inputs: 
• Brightness
• Contrast
• Color level
• Tint
• Input position

53 through 62