Ricoh PJ WX3231N 用户手册

79

This function can be used with any projector input.

The 

Screen Image transmission mode window appears on the computer’s screen.

The 

Remote Control window 

appears.
As the 

Network Utility window is 

still displayed, you can operate the 
projector via the 

Remote Control 

window, while using the Network 
Utility’s functions.
While it is possible to use this function merely to operate the projector, closing the 
Network Utility also closes the Remote Control window.

In the 

Remote Control window, click the   button, and select the 

desired projector from the pull-down list. When you make a selection, the 
Remote Control window displays as shown in  the right figure.
Only one projector can be selected. (It is not possible to operate multiple 
projectors.)

The function of each button and box is as follows:
Power On: 

Turns projector power on.

Power Off:  Turns projector power off.
Freeze:  

The picture is paused.

Input (box):   Click the   button, and select the desired input from the pull-down list.

Go: 

Switches to the input selected in the Input box.

Mute: 

Cuts off picture and sound. Click again to restore picture and sound.

Volume +/–:   Adjust sound volume.
Resize Off 

Restores the picture to its original size.

Resize +/–:  Adjusts the enlargement ratio.

 

: 

Move screen (up/down/left/right/diagonal)

Performing this does not close the 

Network Utility window.

To exit both the 

Network Utility and the Remote Control, click the 

 button on the 

Network Utility window.

