Runco VX-4000d 用户手册
56
Runco VX-4000d/VX-5000d Owner’s Operating Manual
PRE
L
IMINAR
Y
5.2
Lens Replacement
Lens Replacement
Figure 5-1 shows the VX-5000d lens assembly; the VX-4000d lens assembly is similar.
Figure 5-1. VX-5000d Lens Assembly Exploded View
1.
Remove the Projector Front Jewelry by
loosening the captive #2 Phillips screw
below the lens.
loosening the captive #2 Phillips screw
below the lens.
Lens replacement is normally performed at the Runco factory. The
only time this procedure will be performed in the field is if there is a
change.
only time this procedure will be performed in the field is if there is a
change.
Please read the Lens Replacement Procedure carefully
before attempting to install a lens.
before attempting to install a lens.
Front of Lens
Motor Assembly
Electrical Connector
and Harness
Electrical Connector
and Harness
Projector Front Jewelry
Motor Assembly
9/64” Hex Screw (6x)
for Mounting Lens
Note