Toshiba TLP-S200 用户手册

45

44

■ Preparation of the document camera

• Do not jolt or force the camera head or camera arm. Doing so could cause malfunction.
• Note that when extending or rotating the camera arm, the arm moves in an arc. Take

care not to bump yourself or others with it.

■ Image projection with the document camera

The arm light comes on. (Press it again to turn off the light.
Use the light as needed, depending on the indoor lighting
conditions.)

Place the document or other material on or near the camera, and point the camera
head at it.

• The input returns to the previous input when the CAMERA button

is pressed again.

• Camera input can also be selected by pressing the remote

control or camera’s INPUT button.

The Sharpness of the camera image can also be adjusted using
the Image adjustment menu 

.

Fold up the camera using the opposite order from Preparation of the document
camera.

• If the room’s fluorescent lighting causes the image to flicker, either turn off the

fluorescent light, or set the Shutter speed from the Auto setting menu 

. Note that

changing the Shutter speed setting may not eliminate the flicker, depending on the
lighting, state of the document, or image adjustment.

• When arm light is used, document camera image of paper/object with reflective surface

may have bright spots. In this case, turn off the arm light and have an adequate lighting
from the room light.

• The camera light automatically goes off when the camera arm is collapsed.
• The camera will not output images when the camera arm is stowed.
• No audio is output when camera input is selected.

Closer: Larger image

Farther: Smaller image

Turn the focusing ring
to adjust the focus.

Move the arm and camera head to
place the document beside or behind
the camera.