Sanyo PLC-XD2600 用户手册

Openings in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect it

from  overheating,  these  openings  must  not  be  blocked

or covered.

Hot air is exhausted from the exhaust vent. When using

or  installing  the  projector,  the  following  precautions

should be taken.

– Do not put any flammable object or spray can near the

projector, hot air is exhausted from the air vents.

– Keep the exhaust vent at least 3’ (1 m) away from any

objects.

– Do  not  touch  a  peripheral  part  of  the  exhaust  vent,

especially screws and metallic parts. These areas will

become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also may cause

fire hazard by heat.

Cooling  fans  are  provided  to  cool  down  the  projector.

The  fans’  running  speed  is  changed  according  to  the

temperature inside the projector.

When moving the projector, replace the lens cap and

retract adjustable foot to prevent damage to the lens and

cabinet.

When the projector is not in use for an extended period,

put it into a suitable case.

Air Intake Vent

Exhaust Vent

(Hot air exhaust)

Air Intake Vent

Do not tilt the projector more than 30

degrees from above and below.

Do not point the projector up to project an

image.

Do not point the projector down to project

an image.

Do not put the projector on either side to

project an image.

Install  the  projector  properly.  Improper  installation  may

reduce the lamp life and cause a fire hazard.

Do not tilt the projector more than 20

degrees from side to side.

20°

20°

30°

30°

– Do not drop or bump the projector, otherwise damages

or malfunctions may result.

– When carrying the projector, use a suitable carrying case.

– Do not transport the projector by courier or any other

transport service in an unsuitable transport case. This

may cause damage to the projector. For information

about transporting the projector by courier or any other

transport service, consult your dealer.

– Do not put the projector in a case before the projector

is cooled enough.