Toshiba X4100 用户手册

When controlling computer
with Remote Control Unit of
this projector, connect mouse
port of your personal computer
to this connector.  (Refer to
P14.)

Connect S-VIDEO
output from video
equipment to this
jack.  (Refer to P15.)  

Connect an audio output
(stereo) from computer to
these jacks.
(Refer to P14.)

Connect an audio output
from video equipment to
these jacks.  
(Refer to P15.)

Connect composite video
output from video equipment
to VIDEO/Y jack or connect
component video outputs to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks.  (Refer to P15.)  

Connect computer (digital/analog)
output to one of these terminals.  
(Refer to P14.)

This projector has input and output terminals on its back for connecting computers and video equipment.  Refer to figures on
pages 13 to 15 and connect properly.

This projector uses a micro processor
to control this unit, and occasionally,
this micro processor may malfunction
and need to be reset.  This can be
done by pressing RESET button with a
pen, which will shut down and restart
unit. Do not use RESET function
excessively.

When controlling computer with
Remote Control Unit of this
projector, connect mouse port
of your personal computer to
this terminal.  (Refer to P14.)

✽ Do not press this button.  This button

is used for our optional accessories.

Connect component video
output (Y, Cb, Cr or Y, Pb, Pr)
from video equipment to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks or connect computer
output {5 BNC Type (Green,
Blue, Red, Horiz. Sync and
Vert. Sync.)} from computer
to G, B, R, H/V and V jacks.
(Refer to P14 and 15.)

When using Wired/Wireless
Remote Control Unit as Wired
Remote Control, Connect
Wired Remote Control Unit to
this jack with Remote Control
Cable (supplied).