Toshiba NPX10A 用户手册

25

The placement angle and the height of the projected image can be adjusted by the 
foot adjuster.

 Lift up the front of the projector to the 

 To adjust the horizontal angle, use the tilt 

To stow the foot adjuster, hold up the projector 
while pressing the foot adjuster release button, 
then slowly lower the projector.

 Use the zooming ring to adjust the screen size.
 Use the focusing ring to adjust the focus.

The speaker volume can be adjusted when an audio signal is being input.

Lamp characteristics may rarely cause the brightness to fluctuate slightly.
A lamp is consumable item. If used for extended periods, images will appear dark, 
and the lamp could burn out. This is characteristic of a lamp, and is not malfunction. 
(The lifetime of the lamp depends on conditions of use.)
The DLP

®

 chip is made using extremely advanced technology. There may be black 

spots (pixels that do not light) or bright spots (pixels that are constantly lit) on the 
panel. These are intrinsic characteristics of the technology and are not malfunctions. 
Although this projector supports a wide range of RGB signals 

, any resolutions 

not supported by this projector (SVGA, XGA) will be expanded or shrunk, which will 
affect image quality slightly. To view high-quality images, set the computer’s external 
output to SVGA / XGA.
With some models of computer having LCD displays or the like, displaying images si-
multaneously on the projector and the monitor’s display may prevent the images from 
displaying properly. If this happens, turn off the computer’s LCD display. For informa-
tion on how to turn off the LCD display, see the computer’s user’s manual.
If no signal is being input from the connected equipment or signal input is stopped 
while projecting, the “No signal” message will appear.
If a signal not supported by the projector is input, the “Unsupported signal” mes-
sage will appear.
If an unavailable operation button is pressed, the 

 icon will appear.