Toshiba TDP-MT500 用户手册

30

INSTALLATION MENU

ITEM

SETTING

FUNCTION

LANGUAGE --------- -

5言語 ------------

Selects a language used for displays on the screen, such as
menus. Adjusts computer video images.

RGB & COMPONENT ----------------

Adjusts computer video images.

AUTO * ---------------------------------------

Selecting Auto and pressing ENTER button automatically
adjust position and size of the projected images in
accordance with the image signals from the computer.

FREQUENCY *−15∼＋15 --------

If any wide streak pattern appears on the projected images, it
can be adjusted with this setting while viewing the images.

PHASE * ------------ 0 ∼ 31 -----------

If any flicker or blur appears on the projected images, it can be
adjusted with this setting while viewing the images.

H.POS * --------- −30 ∼ +30 -------

Moves display position of projected images in horizontal
direction.

V. POS * --------- −30 ∼ +30 --------

Moves display position of projected images in vertical direction.

MIRROR ------ FLOOR FRONT -----

Select this setting with the projector set on the floor when
viewing the projected images from the front side.Normally,
select this setting.

---------- CEILING FRONT ----

Select this setting with the projector suspended from the
ceiling when viewing the projected images from the front side.

------------ FLOOR REAR ------

Select this setting with the projector set on the floor when
viewing the projected images from the rear side of the screen.

----------- CEILING REAR -----

Select this setting with the projector suspended from the
ceiling when viewing the projected images from the rear side
of the screen.

KEYSTONE --- −12∼＋12 --------

Select this setting when correcting trapezoidal distortion.
Normally, select “0”.

PATTERN -----------------------------------

Pressing ENTER button reveals the test pattern for focus
adjustment.

•

The items with * mark function only for 1080i, 720p, 525p, and 625p input signals and input signals from DVI terminal.

•

The varying range of the vertical position depends on the type of the input signal. With some values the vertical position may not
change, but this is not a failure.

•

With the inputs from DVI-DIGITAL terminal, no change appear on the projected images with adjustment of the dividing ratio and
fine, but this is not a failure.

•

Without input signals, only some of the above items can be changed.

INSTALLATION...

RGB & COMPONENT

MIRROR

KEYSTONE

PATTERN

LANGUAGE

RGB & COMPONENT

INSTALLATION...

FREQUENTCY

AUTO

YES?

PHASE

H. POS

V. POS

0

15

0

0

DIASPLAY MENU

This projector allows each item in the picture quality setting menu and the professional-use picture quality
setting menu (except for color temperature use-adjustment) to be adjusted to up to three kinds of favorable
picture quality for each input signal.

Input that allows the setting

Number of settings

VIDEO

3

S-VIDEO

3

COMPONENT 1, 2

3

DVI-ANALOG/DIGITAL

3

To store the settings:

(Refer to Page 25 for how to set menus.)
1. Set an item in the picture quality setting menu and the professional-use picture quality setting menu.
2. Reveal the signal setting menu.
3. Select “Store the setting “ by pressing 

{

, 

}

 buttons.

4. Press ENTER button.
The setting storage menu appears.
5. Select the memory where the setting is to be stored by pressing 

{

, 

}

 buttons.

6. Press ENTER button.
The setting is stored in the memory.
To cancel the menus:
7. Press MENU button.

To apply the set picture quality:
1. Press MEMORY1, 2, or 3 button.
The picture quality of the projected image comes to the set quality.

INSTALLATION...

MEMORY 2

MEMORY 3

MEMORY 1

SAVE