Toshiba TDP-MT700 用户手册

下载
页码 34
Additional information  
32
 
Indicators
There are three indicators which show the status of the projector. Check the following for information 
about the indicator lights. If there is anything wrong, turn the projector off and contact your dealer. 
When the projector is in a normal state, ... 
When the projector is in an abnormal state, ... 
POWER
TEMP
LAMP STATE
REMARK
Orange
Off
Off
Standby mode.
Flashing 
orange
The projector is powering up.
Cannot turn the projector off.
Green
The projector is under normal 
operation.
Flashing 
green
(1) The projector needs 110 
seconds to cool down as it 
was abnormally shut down 
without the normal cooling 
down process. Or
(2) The projector needs to cool 
for 110 seconds after the 
power is turned off.
Cannot turn the projector on.
POWER
TEMP
LAMP
STATE
REMARK
Orange
Off
Red
(1) The lamp has exceeded its 
usage life. Or
(2) The lamp is not properly 
attached or is damaged.
Solution:
• Install a new lamp.
• Please contact your dealer 
for assistance.
Orange
 Red
Off
The dust filter is seriously clogged 
with dust. The projector is going to 
shut down.
Solution:
• Install a new filter.
Orange
Red
Off
The internal temperature is too 
high.
• The intake ventilation or the 
exhaust ventilation is blocked.
• The projector may be in a 
poorly ventilated location.
• The ambient temperature 
may be too high.
Solution:
• Make sure that the 
ventilation holes are not 
blocked.
• Relocate the projector.
• Stop using the projector until 
the ambient temperature 
falls within the specified 
range. The maximum 
operating temperature is 
specified as 40°C / 104°F.
Orange
Flashing 
red
Flashing 
red
The fans are not working.
Solution:
• Check if the power supply is 
stable.
• Check if there is object stuck 
in the fans.
• Contact your dealer.