Sony VPLHS1FP 用户手册
3-8
VPL-HS1
3) LOW Mode of INPUT-A
1.
Input the 80 IRE FLAT FIELD signal to INPUT-A.
2.
Set the GAIN G to MID mode value at “
_35” with the
LOW mode of the W/B.
Set the GAIN B that is equal to MID mode value at
“
“
_30”. (Set the GAIN B to the same as MID mode
value “
_30”.)
3.
Set the GAIN R that is equal to MID mode value. (Set
the GAIN R to the same as MID mode value.)
4.
Set the BIAS R, G and B that are equal to MID mode
value. (Set the BIAS R, G and B to the same as MID
mode value).
mode value).
5.
Measure the chromaticity (x, y).
6.
Input the 30 IRE signal to INPUT-A.
7
Adjust the chromaticity (x, y) to the values measured
in step 2, by the BIAS R and B of W/B HIGH mode.
in step 2, by the BIAS R and B of W/B HIGH mode.
8.
Input the 80 IRE signal to INPUT-A.
9.
Adjust the chromaticity (x, y) to the values measured
in step 2, by the GAIN R and B.
10. Repeat above steps 6. to 9. until the chromaticity
become the following values.
x
x
± 0.002, y ± 0.004 (The x and y are the values
measured in step 5.)
4) MID/HIGH/LOW Mode of VIDEO
1.
Input the VIDEO signal of NTSC or PAL.
2.
Set the BIAS R, G and B and GAIN R, G and B of
MID, HIGH and LOW mode of W/B that are equal to
the values of corresponding items in INPUT-A.
the values of corresponding items in INPUT-A.
(Altogether 18 items)
3.
Set the GAIN G only of MID mode value at “
_16” in
INPUT-A.