Husqvarna Z4219 用户手册

English-

23

The deck cutting height is obtained by 
pressing the foot pedal forward to lift the 
deck. To lower the deck, you apply pressure 
to the top side of the foot pedal and allow it to 
pivot while allowing the lift arm to rotate to the 
rear of the unit. To stop in a desired cutting 
position, rotate the foot pedal down into the 
notch in the height plate. The cutting height 
range is from 1 1/2" (38 mm) to 5" (127 mm) 
in 1/2" (13 mm) increments. The heights are 
measured from the ground up to the blade tip 
with the engine not running 

.

For mulching, there is a BioClip attachment 
available. This is mounted underneath the 
mower deck and consists of discharge cover 
and blades.

4 1/2

4

3 1/2

3

2 1/2

2

1 1/2

8011-753