Husqvarna Z4219 用户手册

English-

49

Deck has anti-scalp rollers.

Anti-scalp rollers are properly adjusted when 
they are just slightly off of the ground when 
the deck is at the desired cutting height in the 
operating position. Anti-scalp rollers then 
keep the deck in the proper position to help 
prevent scalping in most terrain conditions.

1.

Adjust the deck to the desired cutting 
height (see “TO ADJUST DECK 
CUTTING HEIGHT” in the operation 
section of this manual).

2.

Using a 3/4" wrench and a 9/16" wrench, 
remove the nut and shoulder bolt from 
the anti-scalp roller.

3.

Lower the anti-scalp roller to the ground, 
and raise it up to the next highest hole.

4.

Replace and tighten the nut and shoulder 
bolt.

5.

Be sure to adjust all of the anti-scalp 
rollers to the same position.

6.

Be sure to readjust the anti-scalp rollers 
if the cutting height is changed.

CZ-9