Sony VPL-VW11HT 手册

21

 (GB)

The projector is equipped with an on-screen menu for
making various adjustments and settings.
You can select the language for displaying in the
menu.

Press the MENU key.
The menu display appears.
The menu presently selected is shown as a yellow
button.

PICTURE CTRL

CONTRAST:

80

BRIGHT:

50

RGB ENHANCER: 30

COLOR TEMP: LOW

INPUT-A

Use the 

M or m key to select a menu, then press

the 

, or ENTER key.

The selected menu appears.

SET SETTING

STATUS:

ON

INPUT-A:

COMPONENT

INPUT-B:

COMPONENT

LANGUAGE:

ENGLISH

POWER SAVING: OFF

SIRCS RECEIVER:

FRONT&REAR

INPUT-A

Select an item.
Use the 

M or m key to select the item, then press

the 

, or ENTER key.

Adjust an item.
• When changing the adjustment level:

To increase the number, press the 

M or , key.

To decrease the number, press the 

m or < key.

Press the ENTER key to restore the original
screen.

• When changing the setting:

Press the 

M or m key to change the setting.

Press the 

< or ENTER key to restore the

original screen.

Menus           Setting items

Press the MENU key.
The menu display disappears automatically if no key
is pressed for one minute.

Press the RESET key.
“Complete!” appears on the screen and the settings
appearing on the screen will be reset to their factory
preset values.
Items which can be reset are:
• “CONTRAST”, “BRIGHT”, “COLOR”, “HUE”,

“SHARP” and “RGB ENHANCER” in the
PICTURE CTRL menu.

• “DOT PHASE”, “SIZE H” and “SHIFT” in the

INPUT SETTING menu.

The settings are automatically stored in the projector
memory.

When there is no input signal, “NO INPUT–Cannot
adjust this item.” appears on the screen, and each item
cannot be adjusted.

Using the MENU