Texas Instruments DU9000 用户手册

 

®

Befor Using the Projector

The projection mode has influence on the direction of the projected image and cooling. The projection mode 

option can be used to change the direction of the projected screen and the cooling fan speed to ensure that 

the projector is properly cooled. The improper projection mode settings may trigger over heating or reduce 

the service life of lamps and elements. Please make sure the correct projection mode is set when installing 

the projector. 

Press the MENU button on the remote control or the control panel to bring up OSD and set the projection 

mode, Select CONTROL → Projection Mode 

Installed on the desk and the projection screen will be shown in the normal direction.

Installed on the desk. The image will be projected from behind the screen and the projected image will be 

overturned.

Ceiling mounted. The image will be projected from the front of the screen and will be overturned on 180 de-

gree. The cooling fan speed will be adjusted.

Ceiling mounted. The image will be projected from behind the screen and the projected image will be over-

turned on 180 degree. The cooling fan speed will be adjusted.

The projector is installed upwards and the image is projected upwards. The cooling fan speed will be ad-

justed.

The projector has the features to control the screen size, location and focus. Press the Lens Shift button on 

the Keypad or the remote control to shift zoom in/out or focus on the projected image.

When you need to operate the Lens Shift, Zoom or Focus from the Keypad, please use Enter key and it will 

bring up the OSD for lens shift adjustment.  Then again press the Enter key on the  OSD Menu to Zoom and 

Focus.

Press Lens shift Key on remote for direct control.

Press ▲▼ to move upward or downward to adjust the projected image vertically. 

Press ◄► to move to the right or left to adjust the projected image horizontally.

Press ZOOM+/ ZOOM- key to enlarge (zoom in) or reduce (zoom out) the projected image size.

Press FOCUS+/ FOCUS- key on the control panel to make the image clear.