Texas Instruments DU9000 用户手册

®

 

Start Using the Projector

Adjust the sync of signal to get proper display on screen.

•  H and V Position : Adjust horizontal and vertical position of image if not at center.

•  Phase : Adjust the phase of signal sampling clock if noise is visible.

•  Tracking : Adjust the frequency of signal sampling clock if flicker or vertical banding visible on screen.

•  Sync Level : Adjust the voltage level of signal if projector loss sync during scenes where the signal drops 

below black.

Provide the capability to define custom color Gamut by setting Hue, Saturation and Gain. 

•  on – enable HSG adjust function

•  Off - disable HSG adjust function.

•  Red : Adjust Hue, Saturation and Gain of Red color.

•  Green : Adjust Hue, Saturation and Gain of Green color.

•  Blue : Adjust Hue, Saturation and Gain of Blue color.

•  Cyan : Adjust Hue, Saturation and Gain of Cyan color.

•  Magenta : Adjust Hue, Saturation and Gain of Magenta color.

•  Yellow : Adjust Hue, Saturation and Gain of Yellow color.

•  White : Adjust White Gain of Red, Green and Blue color.

•  Reset : Reset all the setting of HSG to default value.

Use the ◄► button to select the ECO, Normal or Custom Power Level mode. 

•  Normal 

Projection is carried out using the normal lamp power to obtain the brightest projection display.

•  ECO 

Projection is carried out in the energy saving mode to ensure the longest service life of the lamp.

•  Power 

Use the ◄► button to select the Custom Power Level. The projector allows a custom power level equal to 

77%~100% of the lamp power in the Normal mode. This function is available only when the lamp power is 

set to Custom Power Level. It cannot be selected (highlighted) in the Normal or ECO mode.