Texas Instruments DU9000 用户手册

®

 

Start Using the Projector

This function is set to OFF by default. When it is set to ON and no input signal is received within 20 minutes, 

the projector will turn off automatically.

This function is set to OFF by default. When it is set to ON and connected to an AC power source the project-

or will turn on automatically. When you plug the power cable of the projector in an AC socket attached with a 

switch, you can use this function and the power switch (instead of the remote control) to turn on the projector. 

Set this function to OFF if you do not need to use it.

Use the ◄► button to turn on/off the Startup Logo.  You can choose Splash, Black, Blue or White from OSD.

Default setting is: Splash

The projector is provided with a set of trigger output. When automatic screen equipment is available, connect 

it to the screen trigger of the projector by using the cable. The screen automatically turns on when the pro-

jector is powered on. There is a 2-3 second delay before this function is activated.

When the Screen aspect ratio is selected, the trigger outputs 12V power.

When the 16:9 aspect ratio is selected, the trigger outputs 12V power.

Letterbox:  

When the aspect ratio having the letterbox shape is selected, the trigger outputs 12V power.

4:3:    

When the 4:3 aspect ratio is selected, the trigger outputs 12V power.

4:3 Narrow: 

When the 4:3 Narrow aspect ratio is selected, the trigger outputs 12V power.

When the RS232 aspect ratio is selected, the trigger outputs 12V power.

Use the ◄► button to turn on/off Auto source Search

Use the ◄► button to turn on/off Infrared Remote function.

Use this function to set up network configurations so that you can control the projector via the network.

Use ▲▼ and the Enter button to select Network and network settings: 

•  DHCP 

Set DHCP to ON/OFF. When DHCP is set to ON, the DHCP server of the domain will assign an IP address 

to the projector. The IP address will appear in the IP address window and you don't need to make any 

input. Otherwise, the domain does not or cannot assign any IP address, and 0.0.0.0 is shown on the IP 

address window.

•  IP Address 

To specify an IP address, press the Enter button to show the IP address input window. Use the ◄► button 

to select the number in the address to change. Use the ▲▼ button to increase or decrease the number in 

the IP address.  Network IP Address 172 . xxx . xxx . xxx 

•  Submask 

Set the submask. The input method is same as the IP address.

•  Gateway 

Set the gateway. The input method is same as the IP address.

•  DNS 

Set the DNS. The input method is same as the IP address

•  Apply Setting 

Apply all the setting to memory if changed.