Texas Instruments DU9000 用户手册

 

®

Control the projector through a network

 

 

 

 

  Press this button to validate email settings after setup is completed.

PJLink is a standard designed by Japan Business Machine and Information System Industries Association 

(JBMA) for controlling projectors with genuine commands. A PJLink standard compliant projector from any 

supplier can be controlled with these genuine commands. This product supports PJLink control commands. 

Please set up password for PJLink connection in this page.

PJLink Security : Select On to enable PJLink password or Off to disable it.

Password 

: Set up password at length up to 32 characters.

For details on PJLink standard commands and connection methods, please visit the PJLink official web site.

This projector supports TCP/IP communication protocol. It enables you to send RS-232 operation commands 

or simulated IR commands to control projectors which connected with RJ45 cable via terminal connection 

application software, e.g. Tera Term. Please set up IP address and port number with the terminal connection 

application software before controlling your projector with TCP/IP communication protocol:

: IP address of projector

: Please set transmission port number to 7000

See the section on serial interface RS-232 control commands for details on RS-232 operation commands or 

simulated IR commands.