Texas Instruments DU9000 用户手册

Appearance

General

I/O Panel

USB

HDBaseT/LAN

Connect to the RJ45 Cat5 Ethernet cable.

3D Sync Out

Connect to the 3D IR synchronization signal transmitter.

HDMI

Connect to HDMI source.

3G/HD/SD SDI

Connect to SDI source.

VGA

Provide the standard 15-pin VGA connection and can connect to RGB, HD Component or personal comput-

er.

Component / Y/Pb/Rr

Connect BNC-type input terminal to the RGB or YPbPr/YCbCr output signal of video equipment.

RS-232

The 9-pin D-sub interface is used to connect to the PC control system and projector maintenance.

TRIGGER (Trigger)

The 3.5mm mini earphone jack provides 12V (+/-1.5) / 200mA Auto output for screen control.

USB

It is a port exclusively used for maintenance and only can be used by the authorized maintenance personnel.

WIRE (Wired Remote Control)

Connect to the input from the compatible IR transponder system and wired remote control.

Wire remote control

3.5mm mini jack

Tip -> Power

Ring -> Signal

Sleeve->Ground

Tip

Ring

Sleeve

Note: Please make sure the port for insertion is correct before the terminal of the wired remote control is inserted. The remote

control may be damaged if it’s inserted to the wrong port.