Toshiba TDP-P4 用户手册

Manual Sync

The projector adjusts signal synchronization automatically for
most computers. But if the projected computer image looks fuzzy
or streaked, try turning

Auto image

off then back on again. If the

image still looks bad, try adjusting the signal synchronization
manually:

Turn Auto Image off.

Highlight Manual sync, press

SELECT

use the

INCREMENT

and

DECREMENT

buttons to adjust Manual sync until the image is

sharp and free of streaks, then press

SELECT

Manual Tracking

The projector adjusts tracking automatically to match the video
signal from your computer. However, if the display shows evenly
spaced, fuzzy, vertical lines or if the projected image is too wide
or too narrow for the screen, try turning

Auto Image

off then back

on again. If the image is still bad, try adjusting the tracking man-
ually:

NOTE: The Manual Sync,

Manual Tracking, Horizontal

Position and Vertical Position

options are available only for

analog computer sources. The

projector sets these options

automatically for digital computer

and video sources, with no manual

override.

Turn Auto image off.

Highlight Manual tracking, press

SELECT

use the

INCREMENT

and

DECREMENT

buttons to adjust Manual tracking until the

fuzzy vertical bars are gone, then press

SELECT

Horizontal Position

Follow these steps to manually adjust the horizontal position:

Turn Auto image off.

Highlight Horizontal position, press

SELECT

use the

INCRE-

MENT

and

DECREMENT

buttons to adjust the Horizontal posi-

tion, then press

SELECT

Positioning adjustments are saved when you turn off the projec-
tor.

Vertical Position

Follow these steps to manually adjust the vertical position.

Turn Auto image off.

Highlight Vertical position, press

SELECT

use the

INCREMENT

and

DECREMENT

buttons to adjust the Vertical position, then

press

SELECT

Positioning adjustments are saved when you turn off the projec-
tor.