Fisher PDG-DWT50L 用户手册

下载
页码 135
 
To the Owner 
Before installing and operating the projector, read this 
manual thoroughly. 
The projector provides many convenient features and 
functions. Operating the projector properly enables you 
to manage those features and maintains it in good condi-
tion for many years to come. 
Improper operation may result in not only shortening the 
product life, but also malfunctions, fire hazard, or other 
accidents. 
If your projector seems to operate improperly, read this 
manual again, check operations and cable connections 
and try the solutions in the  “Troubleshooting” section in 
the back of this booklet. If the problem still persists, con-
tact the dealer where you purchased the projector or the 
service center. 
 
 
CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR 
BACK). NO USER-SERVICEABLE PARTS 
INSIDE EXCEPT LAMP REPLACEMENT. 
REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL. 
 
THIS SYMBOL INDICATES THAT 
DANGEROUS VOLTAGE CONSTITUTING A 
RISK OF ELECTRIC SHOCK IS PRESENT 
WITHIN THIS UNIT. 
 
THIS SYMBOL INDICATES THAT THERE 
ARE IMPORTANT OPERATING AND 
MAINTENANCE INSTRUCTIONS IN THE 
USER’S MANUAL WITH THIS UNIT. 
 
NOTE:
 This symbol and recycle system are applied 
only to EU countries and not applied to the 
countries in the other area of the world.
 
 
Your  SANYO product is designed and  manu-
factured with high quality materials and 
components which can be recycled and 
reused. 
This symbol means that  electrical and  elec-
tronic equipment, at their end-of-life, should 
be disposed of separately from your house-
hold waste. 
Please dispose of this equipment at your local commu-
nity waste collection/recycling center. 
In the European Union there are separate collection 
systems for used electrical and electronic products. 
Please help us to conserve the environment we live in! 
READ AND KEEP THIS USER’S MANUAL FOR LATER 
USE. 
   
Safety Precaution
 
WARNING: 
TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO 
RAIN OR MOISTURE.
 
−  This projector produces intense light from the projec-
tion lens. Do not stare directly into the lens as much 
as possible, otherwise eye damage could result. Be 
especially careful that children do not stare directly 
into the beam. 
−  Install the projector in a proper position. Otherwise it 
may result in fire hazard. 
−  Allowing the proper amount of space on the top, 
sides, and rear of the projector cabinet is critical for 
proper air circulation and cooling of the unit. The di-
mension shown here indicates the minimum space 
required. 
If the projector is to be built into a compartment or 
similarly enclosed, these minimum distances must be 
maintained. 
−  Do not cover the ventilation slot on the projector. 
Heat build-up can reduce the service life of your  
projector, and can also be dangerous. 
SIDE and TOP 
REAR 
−  If the projector is unused for an extended time,  
unplug the projector from the power outlet. 
  CAUTION ON HANGING FROM THE CEILING 
When hanging the projector from the ceil-
ing, clean air intake vents, filters, or top of 
the projector periodically with a vacuum 
cleaner. If you leave the projector unclean 
for a long time, the cooling fans can be 
clogged with dust, and it may cause a 
breakdown. 
DO NOT SET THE PROJECTOR IN GREASY, WET, OR 
CONDITIONS SUCH AS IN A KITCHEN TO PREVENT 
A BREAKDOWN. IF THE PROJECTOR COMES IN 
CONTACT WITH OIL OR CHEMICALS, IT MAY 
BECOME DETERIORATED. 
WARNING: 
Not for use in a computer room as defined in the Stan-
dard for the Protection of Electronic Computer/Data 
Processing Equipment, ANSI/NFPA 75. 
Ne peut être utilisé dans une salle d’ordinateurs telle que 
définie dans la norme ANSI/NFPA 75 Standard for Pro-
tection of Electronic Computer/Data Processing 
Equipment.