Fisher PLC-XU41 用户手册

Choose either Computer 1 or Computer 2 by pressing the INPUT
button on the top control or press the COMPUTER button on the
remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.

Press the MENU button and the On-Screen Menu will
appear. Press the Point

7 8

button to move the red frame

pointer to the Input Menu icon.

Computer

Input Menu

Press the Point

button to move the red arrow pointer to

either Computer 1 or Computer 2, and then press the
SELECT button.

After the Source Select Menu appears for Computer 1,
move the pointer to RGB and then press the SELECT button.

Input Menu

Computer 1

Video

Computer 2

COMPUTER button

Computer 1

Computer 2

When the input source is analog coming from a
computer through the COMPUTER IN 1/
COMPONENT IN terminal, select RGB.

RGB

INPUT button

Input Source Selection

Direct Operation

Menu Operation

Computer Input

Move the pointer to RGB and
press the SELECT button.

Source Select Menu

✔

Note:

Computer 2 is not displayed when the COMPUTER IN 2/ MONITOR OUT terminal is
used as Monitor out. (p41)

Move the pointer (red
arrow) to Computer 1
and press the SELECT
button.

Input Menu icon

Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.

RGB (Scart)

Component

See "Selecting Input Source (Component / RGB-
Scart 21-pin )" on p33.

✳ See Note on the bottom of this page.

✳