EIKI LC-SXG400L 用户指南

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote 

control codes prevents interference from other remote controls when several projectors or video equipment 

next to each other are operated at the same time. Change the remote control code for the projector first before 

changing that for the remote control. See “Remote control” in the Setting Menu on page 52.

Press and hold the MENU and a number button (1–8) 

for more than five seconds to switch between the 

codes.

To initialize the remote control code, slide the RESET/ 

ON/ALL-OFF switch to “RESET,” and then to “ON.” The 

initial code is set to Code 1.

Press and hold the MENU and a number button 
(1–8) that corresponds to the remote control code 
for more than five seconds to switch between 
the codes.