EIKI LC-SXG400L 用户指南

The Auto PC Adjustment 
function operates to adjust 

the projector. 

The PC System Menu icon 
  Selected system is  

 

  displayed.

Systems in this dialog box 
can be selected.

Press the MENU button to display the On-Screen 

Menu. Use the Point 

7 8

 buttons to move the red 

frame pointer to the PC System Menu icon.

Use the Point 

ed

 buttons to move the red arrow 

pointer to the desired system and then press the 

SELECT button.  

Custom Mode (1–10) set in the 
PC Adjust Menu (pp.39–40).

PC system can also be selected manually.

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, SXGA+, 

WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal 

source, this projector automatically detects the signal format and tunes to project a proper image without any 

additional settings. (Signal formats provided in this projector are shown on pages 70–71.)

One of the following messages may appear when:

The projector cannot recognize the connected 

signal conforming to the provided PC Systems. 

The “Auto” is displayed on the System Menu 

box and the Auto PC Adjustment function 

works to display proper images. If the image is 

not projected properly, a manual adjustment is 

required (pp.40–41).

There is no signal input from the computer. 

Check the connection between your computer 

and the projector. (See “Troubleshooting” on 

page 63.)

The preset system is manually adjusted in the 

PC Adjust Menu. The adjusted data can be 

stored in Mode 1–10 (pp.39–40).

PC Systems provided in this projector is chosen.  

The projector chooses a proper system provided 

in the projector and displays it.  

*Mode 1 and SVGA 1 are examples.