EIKI LC-SXG400L 用户指南

Check the indicators for the projector condition.  

• • • lighting

• • • off

• • • blinking

POWER

LAMP

WARNING

TEMP.

The projector is off. (The AC power cord is unplugged.)

The projector is in stand-by mode. Press the ON/STAND-BY button to 

turn on the projector.

The projector is operating normally.

The projector is in the Power management mode.

The projector is preparing for stand-by or the projection lamp is 

being cooled down. The projector cannot be turned on until cooling is 

completed and the POWER indicator stops blinking.

The WARNING TEMP. indicator blinks slow when the temperature 

inside the projector is elevated close to the abnormally high level.

The temperature inside the projector is abnormally high. The 

projector cannot be turned on. When the projector is cooled down 

enough and the temperature returns to normal, the POWER indicator 

stops blinking and the projector can be turned on. (The WARNING 

TEMP. indicator keeps blinking.) Check and clean the filter.

The projector has been cooled down enough and the temperature 

returns to normal. When turning on the projector, the WARNING 

TEMP. indicator stops blinking. Check and clean the filter.

POWER, LAMP, WARNING 
TEMP., WARNING FILTER, 
and LAMP REPLACE 
indicators are blinking all 
together.

The projector detects an abnormal condition and cannot be turned 

on. Unplug the AC power cord and plug it again to turn on the 

projector. If the projector is turned off again, unplug the AC power 

cord and contact the dealer or the service center. Do not leave the 

projector on. It may cause an electric shock or a fire hazard.