Canon WX6000 用户手册

147

Installation Manual

Installation

■ Do Not Use in the Following Environments
• Do not install the projector in a humid or dusty location or a position where there is a lot 

of oily smoke or cigarette smoke. Optical parts such as the lens and mirror may be 
stained, resulting in poor picture quality.

• Do not install close to high-voltage power lines or power sources. The projector may not 

operate correctly.

• Do not use the projector on a soft surface such as a carpet or sponge mat. Heat may 

accumulate inside the projector, causing a malfunction.

• Do not use the projector in a location that is subject to very high temperatures, very low 

temperatures, or high levels of humidity. Doing so may cause a malfunction. The tem-
perature and humidity ranges for operation and the temperature range for storage are 
shown below.

■ Do Not Touch the Lens with Bare Hands
Do not touch the lens with bare hands. Doing so may adversely affect picture quality.

■ Install at a Sufficient Distance from Walls and Other Obstructions

■ Be Careful of Condensation
If the temperature of the room rises suddenly, moisture in the air may condense on the 
projector lens and mirror, causing the image to become blurred. Wait until condensation 
evaporates and a normal picture is shown.

■ When Using the Projector at Altitudes Greater than 2,300 m
Contact the Canon Customer Support Center if you intend to use this projector at altitudes 
of 2,300 m or higher.

Operating

temperature

Operating

humidity

Storage

temperature

5°C to 35°C

Up to 85%

-10°C to 60°C