Crestron electronic CP-X4014WN 用户手册
6
1. Connection to the network
1.1 System requirements (continued)
• The network communication control is disabled while the projector is
in standby mode if the STANDBY MODE item is set to SAVING. Please connect
the network communication to the projector after setting the STANDBY MODE
to NORMAL. (
the network communication to the projector after setting the STANDBY MODE
to NORMAL. (
SETUP menu in the Operating Guide)
• You can get the latest version of the applications for the network functions of the
projector and the latest information for this product from the Hitachi website (http://
www.hitachi-america.us/digitalmedia or http://www.hitachidigitalmedia.com).
projector and the latest information for this product from the Hitachi website (http://
www.hitachi-america.us/digitalmedia or http://www.hitachidigitalmedia.com).
NOTE
1.2 Quick connection
The “LiveViewer” supports very quick and simple connection to the network.
When making use of the network function, it is recommended that you install the
"LiveViewer" on your computer. For details, refer to the manual for "LiveViewer".
When making use of the network function, it is recommended that you install the
"LiveViewer" on your computer. For details, refer to the manual for "LiveViewer".
In case you don’t want to use the “LiveViewer” or you cannot use it by some
reason, proceed to the manual setting, the item 1.3 for the wired LAN (
reason, proceed to the manual setting, the item 1.3 for the wired LAN (
7) and
the item 1.4 for the wireless LAN. (
11)