Pitney Bowes B702 用户手册

The default postage value is set at the factory or by you 
while the meter is in the setup mode. (This value is often that 
for first class mail weighing up to one ounce). This value ap-
pears in the display after you turn the meter on and the self 
test is completed. The default value also displays automati-
cally after the meter has been inactive for a period of time. 

The meter is ready to use 
when the default value is 
shown bracketed by three 
bars. See the figure at right. 

1.  Select the account to which you want to charge postage 

(B700 only, if your B700 is equipped with the optional ac-
counting feature).

2.  (B700 only) Select the advertising slogan and/or the in-

scription you want to use . 

3.  To print postage using the default value, place your ma-

terial (envelope, post card or tape sheet) on the transport 
face up and push it  against the rear wall (1). Slide it to 
the right up to the trip mark (2) and let go as the meter 
takes the mailpiece. See the figures below.