Lexmark 10N0217 产品宣传页

Refill Instructions -
Lexmark 10N0217 (No.17) 
 

Lexmark All in One X72 . X74 . X75 . X1130 . X1150 . X1180 
. X225
Color Jetprinter Z13 . Z23 . Z25 . Z33 . Z34 . Z35 . Z515 . 
Z601 . Z605 . Z615

 

 Remove the top from the black ink bottle and using 

the syringe remove 10ml of black ink 

 

 Insert the steel filling tube into the appropriate filling 

holes. 

. Push down into centre of the sponge.

 Cartridge contains a sponge and a 

slight resistant may be felt.

 Inject ink. When ink overflows from filling 

hole or starts to leak from print heads cartridge is full. 
Stop injecting immediately

.

Blot printer heads with tissue before continuing to fill 
next colour

.

Clean syringe with water and dry 

before refilling next colour

.

 After refilling replace label back over filling hole.

 Leave the cartridge to stand overnight on non-

absorbent surface this will ensure no
leakage and give the ink time to fully saturate the 
sponge.

 Install cartridge and run a priming cycle.

 The ink indicator level may need to 

be turned off. Check your HP instructions manual for 
details.

Assemble syringe and steel filling tube and fill with 

appropriate colour ink. 

The filler hole is located on top of the cartridge.

Original Lexmark 17 Cartridge, Syringe & Filling 

Tube 

Black Ink 10ml

fig.2

fig.3

fig.4

fig.5

fig.1

Black 

Refilling 
Hole

Order your

Refill PACKs at:

www.

.com

refill

4