Lexmark PRO4000 用户手册
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
Memory card troubleshooting checklist
Before you troubleshoot, use the following checklist to solve most memory card problems:
•
Make sure that the memory card you are using can be used in the printer.
•
Make sure the memory card is not damaged.
•
Make sure memory card contains supported file types.
Nothing happens when a memory card is inserted
If the "Memory card troubleshooting checklist" does not solve the problem, then try the following:
R
EINSERT
THE
MEMORY
CARD
The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.
Network troubleshooting
•
•
•
•
Network troubleshooting checklist
Before beginning to troubleshoot the wireless printer, verify the following:
General Networking
Make sure:
•
The printer, the computer, and the access point (wireless router) are all plugged in and turned on.
•
The wireless network is working properly.
Try accessing other computers on your wireless network. If your network has Internet access, try connecting to the
Internet over a wireless connection.
Internet over a wireless connection.
•
The printer driver is installed on the computer from which you are performing a task.
•
The correct printer port is selected.
•
The IP address, gateway, and network mask are correct for your network.
Print a network setup page from the printer to check the network settings.
•
All switches, hubs, and other connecting devices are turned on.
Ethernet Networking
Make sure:
•
The Ethernet cable and connectors are not damaged.
Check the connectors at both ends for any obvious damage. If possible, use a new cable.
•
The Ethernet cable is firmly plugged in to the printer and to the network hub or wall connection.
Troubleshooting
162