Avanti CF2016 用户手册

下载
页码 24
 
10 
having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at 
least 10 amperes. 
 
 
SURGE PROTECTOR 
Most electrical appliances use a series of electric control boards to operate.  These boards are very 
susceptible to power surges and could be damaged or destroyed.   
 
If the appliance is going to be used in an area or if your city / country is prone to power surges / 
outages; it is suggested that you use a power surge protector for all electrical devices / appliances 
you use.  The surge protector that you select must have a surge block high enough to protect the 
appliance it is connected to.  If you have any questions regarding the type and size of surge protector 
needed contact a licensed electrician in your area. 
 
Damages due to power surges are not considered a manufacturer covered defect and will void your 
product warranty. 
 
 
 
 
OPERATING YOUR FREEZER 
 
Temperature Control 
•  Your freezer has one control for regulating the temperature.   The temperature control is located 
on the lower right hand corner. 
•  The first time you turn the unit on, switch on the Fast Freeze switch (amber) and run for at least 2 
hours before putting frozen foods inside.  This will ensure the cabinet is thoroughly chilled before 
food is put in.   
•  Turn off the Fast Freeze switch. 
•  The range of the temperature control is from position" OFF", “1” the warmest to "5" the coldest. 
Adjust the temperature control to the setting that best suits your needs. The setting of “3” should 
be appropriate for home or office freezer use. 
•  To turn the freezer off, turn the power switch to "OFF". 
 
 
NOTE: 
•  If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before restarting 
the unit. If you attempt to restart before this time delay, the freezer will not start. 
•  Large amounts of food will lower the cooling efficiency of the appliance. 
•  If you choose to change the thermostat setting, adjust thermostat control by one numerical 
increment at a time.  Allow several hours for temperature to stabilize between adjustments.