Toshiba 3511 用户手册

November 2003  ©  TOSHIBA TEC

2 - 1

e-STUDIO3511/4511  ERROR CODE AND SELF-DIAGNOSTIC MODE

One of the following error codes is displayed at the upper right of the screen while pressing the

[CLEAR] button and the digital key [8] simultaneously when the “CLEAR PAPER” or “CALL

SERVICE” symbol is blinking.

E010

E011

E020

E030

E090

E110

E120

E130

E140

E150

E160

E190

E200

Paper exit jam

Other paper jam

Paper exit jam

Other paper jam

Paper misfeeding

Paper transport

jam

Trouble-

shooting

Error code

Classification

Contents

Jam not reaching the exit sensor : The paper which has passed

through the fuser unit does not reach the exit sensor.

Paper jam caused by clinging to the transfer belt:  The paper

after the 2nd transfer is clinging to the transfer belt and entering

under the receiving tray.

Stop jam at the exit sensor: The trailing edge of the paper does

not pass the exit sensor after its leading edge has reached this

sensor.

Power-ON jam: The paper is remaining on the paper transport

path when power is turned ON.

HDD abnormality causes jam: Image data to be printed cannot

be prepared.

ADU misfeeding (Paper not reaching the registration sensor):

The paper which has passed through ADU does not reach the

registration sensor during duplex printing.

Bypass misfeeding (Paper not reaching the registration sensor):

The paper fed from the bypass tray does not reach the registra-

tion sensor.

Upper drawer misfeeding (Paper not reaching the upper drawer

feed sensor): The paper fed from the upper drawer does not

reach the upper drawer feed sensor.

Lower drawer misfeeding (Paper not reaching the lower drawer

feed sensor):  The paper fed from the lower drawer does not

reach the lower drawer feed sensor.

PFP upper drawer misfeeding (Paper not reaching the PFP

upper drawer feed sensor): The paper fed from the PFP upper

drawer does not reach the PFP upper drawer feed sensor.

PFP lower drawer misfeeding (Paper not reaching the PFP

lower drawer feed sensor): The paper fed from the PFP lower

drawer does not reach the PFP lower drawer feed sensor.

LCF misfeeding (Paper not reaching the LCF feed sensor): The

paper fed from the LCF does not reach the LCF feed sensor.

Upper drawer transport jam (Paper not reaching the registration

sensor): The paper does not reach the registration sensor after

it has passed the upper drawer feed sensor.

Ch. 5.1.1

Ch. 5.1.4

Ch. 5.1.1

Ch. 5.1.4

Ch. 5.1.4

Ch. 5.1.2

Ch. 5.1.2

Ch. 5.1.2

Ch. 5.1.2

Ch. 5.1.2

Ch. 5.1.2

Ch. 5.1.2

Ch. 5.1.3