Toshiba 3511 用户手册

November 2003 © TOSHIBA TEC

3 - 31

e-STUDIO3511/4511 ADJUSTMENT

Code

1612

1613

1614

1615

1616

Remarks

The smaller the value is, the toner amount adhered

decreases of the high density area (ex. prevention of

fusing offsetting, etc).

Acceptable values : 0 to 255.

(Default: Plain paper: 255, Thick paper 1: 249,

Thick paper 2: 237, Thick paper 3: 237,

OHP film: 249)

Paper type

Plain paper

Thick paper 1

Thick paper 2

Thick paper 3

OHP film

Note:

The larger the value is, the more frequently fusing offsetting occurs.

3.5.14 Maximum text density adjustment

The maximum text density of each color at Full Color Mode can be adjusted as follows.

3.5.13 Maximum toner density adjustment to paper type

The maximum toner amount adhering to the paper can be controlled.

Make a test copy and compare the image obtained with the current settings; if necessary, make

adjustment using the following procedure.

Note:

Be sure that this adjustment be made after performing “3.5.1 Automatic gamma adjustment”.

Procedure is same as that of “3.5.2 Density adjustment”.

Code

1630

1631

1632

1633

Remarks

The larger the value is, the darker the maximum text

density of each color to be adjusted becomes.

Acceptable values: 0 to 10 (Default: 5)

Item to be adjusted

Maximum text density

Color

Yellow

Magenta

Cyan

Black