Toshiba 3511 用户手册

November 2003 © TOSHIBA TEC

3 - 43

e-STUDIO3511/4511 ADJUSTMENT

3.7.9 Fine adjustment of black density

The density of black side on scanned image is adjusted at color-scanning.

Note:

Be careful for the value not to be too large since the gradation is reproduced worse in darker side.

(1)

While pressing [0] and [5] simultaneously, turn the power ON.

(2)

Key in the codes and press the [START] button.

(3)

Key in the adjustment values. Acceptable values : 0 to 4. (To correct the value once keyed in,

press [CLEAR] button.)

(4)

Press the [ENTER] or [INTERRUPT] button to store the value in memory.

→ The equipment

goes back to the ready state.

(5)

Let the equipment restart and perform scanning job.

(6)

If the desired image has not been attained, repeat step (1) to (5).

3.7.10 RGB conversion method selection

The color space conversion method of image is decided at color-scanning.

Code

1075

1076

1077

Original mode

Text

Printed Image

Photo

Remarks

The larger the value is, the black side of the image becomes darker.

Acceptable values: 0 to 4 (Default: 0)

(1)

While pressing [0] and [5] simultaneously, turn the power ON.

(2)

Key in the codes and press the [START] button.

(3)

Key in the adjustment values. Acceptable values : 0 to 3. (To correct the value once keyed in,

press [CLEAR] button.)

(4)

Press the [ENTER] or [INTERRUPT] button to store the value in memory.

→ The equipment goes

back to the ready state.

(5)

Let the equipment restart and perform scanning job.

(6)

If the desired image has not been attained, repeat step (1) to (5).

Code

1080

1081

1082

Original mode

Text

Printed Image

Photo

Remarks

0: sRGB 1: AppleRGB 2: ROMMRGB 3: AdobeRGB

(Default: 0)