Toshiba 3511 用户手册

e-STUDIO3511/4511 ADJUSTMENT

3 - 56

November 2003  ©  TOSHIBA TEC

It is mainly performed at the installation. It is also required when the RADF is dislocated for some reason

such as moving the equipment.

Remove the platen sheet during adjustment.

(1)

Open the RADF and then attach 2

positioning pins to the equipment.

(The positioning pins have been attached at

the rear of the right-hand hinge of the

RADF.)

(2)

Close the RADF to check that the

positioning pins fit smoothly into the holes

on the RADF.

If they do not, adjust them according to the

following procedure.

(3)

Loosen the stepped screw 1 turn and 2

screws on the adjustment plate a half turn

(status of temporary fixing).

Half turn

1 turn

Positioning
pin