Toshiba 3511 用户手册

November 2003  ©  TOSHIBA TEC

3 - 73

e-STUDIO3511/4511 ADJUSTMENT

If the overlap between the sensor and the flag is wrong for some reason, perform the following adjustment.

(3)

Tighten the screw so that the overlap between

the flag of the front/rear jogging rack plate and

the sensor is 1.5 mm to 2.0 mm.

Jogging plate
adjusting plate

Screw

Adjusting plate

Screw

Jogging plate
adjusting plate

Adjusting plate

Sensor

Sensor flag

1.5 mm to 2.0 mm

(1)

Remove the processing tray unit.

(2)

Loosen the mounting screw of the front/rear

jogging plate adjusting plate; then, move the

adjusting plate to the left and the right.