Toshiba 3511 用户手册

November 2003  ©  TOSHIBA TEC

2 - 21

e-STUDIO3511/4511  ERROR CODE AND SELF-DIAGNOSTIC MODE

Mode

Control panel

check mode

Test mode

Test print

mode

Adjustment

mode

Setting mode

List print mode

PM support

mode

Firmware

update mode

To enter the desired mode, turn ON the power while two digital keys designated to each mode (e.g. [0]

and [5]) are pressed simultaneously.

<Operation procedure>

• Control panel check mode (01):

1. A mode can be canceled by [POWER] OFF/ON when the LED is lit and the LCD is blinking.

2. Button Check

Buttons with LED

(Press to turn OFF the LED.)

Buttons without LED

(Press to display the message on the control panel.)

Button on touch panel

(Press to display the screen on the control panel at power-

ON.)

[0][1]

[POWER]

(LED lit/LCD blinking)

[START]

[START]

(Button check)

[POWER] OFF/ON

(Exit)

For start

[0]+[1]+

[POWER]

[0]+[3]+

[POWER]

[0]+[4]+

[POWER]

[0]+[5]+

[POWER]

[0]+[8]+

[POWER]

[9]+[START]+

[POWER]

[6]+[START]+

[POWER]

[8]+[9]+

[POWER]

Contents

All LEDs on the control panel are lit, and all

the LCD pixels blink.

Checks the status of input/output signals.

Outputs the test patterns.

Adjusts various items.

Sets various items.

Prints out the data lists of the codes 05 and

08, PM support mode and pixel counter.

Clears each counter.

Performs updating of the system firmware.

For exit

[POWER]

OFF/ON

[POWER]

OFF/ON

[POWER]

OFF/ON

[POWER]

OFF/ON

[POWER]

OFF/ON

[POWER]

OFF/ON

[POWER]

OFF/ON

[POWER]

OFF/ON

Display

100%  C   A4

TEST MODE

100%  P  A4

TEST PRINT

100%  A  A4

TEST MODE

100%  D

TEST MODE

100%  UA  A4

LIST PRINT

100%  K

TEST MODE