Tally Genicom 8026DN 用户手册
Jun 06
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
7
Safety Notes
Stop operation immediately if your machine produces smoke, excessive heat, unusual
noise, or smell, or if water or foreign object (e.g. metal strip, liquid) enters the machine.
These conditions can cause fire. Immediately switch off and unplug the machine, and
contact our Customer Support Center or your dealers.
noise, or smell, or if water or foreign object (e.g. metal strip, liquid) enters the machine.
These conditions can cause fire. Immediately switch off and unplug the machine, and
contact our Customer Support Center or your dealers.
To prevent fire or electric shock, follow the instruction below based on your machine
configuration. If in doubt, contact our Customer Support Center or your dealers.
• If your machine is a 220/240 V model, there is no need to attach a separate earth line
configuration. If in doubt, contact our Customer Support Center or your dealers.
• If your machine is a 220/240 V model, there is no need to attach a separate earth line
since the earth connection is incorporated in the power line. Plug it into a properly rated
outlet.
outlet.
• If your machine is a 100/120 V model, use the green earth wire bundled with the power
cord, located at the rear of the machine.
The earth wire must be connected to one of the following conductors:
- Earth terminal of the specified power outlet
- A piece of copper buried in the earth 650 mm (25.6") or deeper
- Earth terminal with Class D* earthing.
- Earth terminal of the specified power outlet
- A piece of copper buried in the earth 650 mm (25.6") or deeper
- Earth terminal with Class D* earthing.
* Class D is the regulation for Japan only.
Never connect the earth wire to any of the following:
• Gas pipe, which can be ignited and explode
• Telephone line earth wire or lightning rod, which can draw an excessive electric current if
• Gas pipe, which can be ignited and explode
• Telephone line earth wire or lightning rod, which can draw an excessive electric current if
hit by lightning
• Water faucet or pipe whose electrical conductivity is broken by a non-metal part
Do not unplug or replug the machine while it is on. Unplugging a live connector can deform
the plug and cause fire.
the plug and cause fire.
When unplugging the machine, grasp the plug instead of the cord. Forcibly pulling on a cord
can damage it and cause fire or electric shock.
can damage it and cause fire or electric shock.
Be sure to switch off and unplug the machine before accessing the interior of the machine
for cleaning, maintenance, or fault clearance. Access to a live machine's interior can cause
electric shock.
for cleaning, maintenance, or fault clearance. Access to a live machine's interior can cause
electric shock.
When removing jammed paper, make sure that no pieces of torn paper are left in the
machine. A piece of paper remaining in the machine can cause fire. If a sheet of paper is
wrapped around the heat roller, or when clearing a jammed paper that is difficult or
impossible to see, do not try to remove it by yourself. Doing so can cause injuries or burns.
Switch off the machine immediately, and contact our Customer Support Center.
wrapped around the heat roller, or when clearing a jammed paper that is difficult or
impossible to see, do not try to remove it by yourself. Doing so can cause injuries or burns.
Switch off the machine immediately, and contact our Customer Support Center.
Do not use conductive paper, e.g. folding paper, carbonic paper and coated paper. When
paper jam occurs, they can cause a short circuit and fire.
paper jam occurs, they can cause a short circuit and fire.
CAUTION