DYMO 350D 用户手册

11

2. Use the arrow keys to move to the desired symbol. 

The left and right arrows move horizontally along a 
row of symbols. The up and down arrow keys scroll 
vertically through the rows of symbols. 
To quickly see a row of symbols, you can press the 
letter corresponding to the row you want.

3. When you locate the desired symbol, press OK to 

add the symbol to your label text.

You can print multiple copies of a label at one time, 
print fixed-length labels, review label text and format, 
and adjust the printing contrast.

You can print up to 16 copies of a label at one time. 
When printing multiple copies, a dotted cut-line is 
printed between each label.

To print multiple copies of the label
1. Press Extra and then select # Copies.
2. Press the up arrow key to increase the number of 

copies to print.

3. Press the down arrow key to begin decreasing the 

number of copies from 16.

4. Press OK.
5. Press Print to begin printing.

x 

You may notice a brief pause in printing between 

each label for more complex formats.

When printing is finished, the number of copies to 
print returns to the default value of 1.

You can print a series of labels with the last number 
incremented by one number. The number of labels 
serialized depends upon the number of copies you 
selected to print. Only the last series of numbers that 

follows any letter, space, or punctuation will be 
serialized. For example, abc123 will print as abc123, 
abc124, abc125; and 123-998 will print as 123-998, 
123-999, 123-1000, and so on.

To serialize your labels
1. Enter the text for your label.
2. Select the number of labels to print as described in 

3. Press Extra.
4. Select Incremental Print and press OK.
5. Press Print.

Normally, the length of the label is determined by the 
length of the text entered. However, you may wish to 
make a label for a specific purpose that is a fixed 
length regardless of the length of the text.

You can specify a fixed length for a label in 0.1”(2 mm) 
increments between 1.5” (40 mm) and 15.0” (400 
mm). The preset fixed length is 1.5” (40 mm). Any 
change you make to the fixed length setting remains 
in effect until you change it.

To set the label length
1. Press Shift-Font/Fixed Length.
2. Press the up arrow to increase the length.
3. Press the down arrow to decrease the length.
4. Press OK to set the fixed length.
5. After you print the label, press Clear to turn off the 

fixed label length setting; otherwise, all your 
subsequent labels will print with this fixed length.

You can preview the text or format of your label prior 
to printing. A two-line label is previewed as a single-
line label.