Canon F60 用户手册

Registering information in your machine

Chapter 6

To enter two characters that are under the same key: Press the numeric key, press [

3],

then press the same numeric key again. For example, to enter <DD> you would press [3], [

3],

[3].

To enter a space: Press [

3].

To delete a character: Press [

2].

To delete an entire entry: Press and hold [

2].

 Registering required sender information

In the United States, FCC rules governing the use of facsimile equipment state that your
fax/telephone number, personal name or company name, and date and time of transmission
must be printed on every facsimile transmission.
Your machine has been designed to print this information at the top of every fax you send.
You must therefore register this information in your machine before using it.

Below is an example of how your sender information would print on a fax sent from your
machine:

• You can set the sender information to print inside or outside the image area (

 <TTI POSITION>,

p. 13-3).

If you have connected your machine to a computer, enter the sender information from the
MultiPASS Suite software. Otherwise, follow this procedure to register it from the operation
panel:

12/03/2002  15:33  FAX 123 4567                   YOUR NAME        RECIPIENT S NAME               001/001

THE SLEREXE COMPANY LIMITED

SAPORS LANE¥BOOLE¥DORSET¥BH25 8ER

TELEPHONE BOOLE (945 13) 51617 — FAX 1234567

Our Ref. 350/PJC/EAC

Date and time 
of  transmission

Your fax/telephone 
number. 
You can select 
FAX or TEL to be 
displayed in front 
of the number 
(

 <TELEPHONE # 

MARK>, p. 13-3).

If you used memory 
sending and dialed the 
fax number using speed 
dialing, the other party’s 
name appears here.

Page number

Your name