Canon MP760 用户手册

下载
页码 97
2 - 
10 
 
No
 
 
Function Phenomenon
 
Condition
 
Cause
 
Corrective action
 
Possible call or complaint
 
6 A Print 
results 
 
Soiling on the back 
side of paper (lines 
or streaks parallel 
to the paper feed 
direction) 
 
-After continuous borderless 
printing of small sized paper 
(such as 4x6), when a larger 
sized paper (such as A4) is 
rinted. 
-With Photo Paper Plus Double 
Sided or postcards, the 
phenomenon is likely to be 
noticeable and to be complained 
of by users, as printing is 
performed on both sides of such 
paper. 
 
In borderless printing, 
printing is performed to 
the size slightly larger 
than the paper size, and 
ink off the paper is 
absorbed by the platen's 
ink absorber. Absorbed 
ink may attach to the 
platen rib(s) after several 
dozen sheets are printed, 
causing soiling at the 
leading edge of paper or 
on the back side of paper.
 
1.Perform Bottom plate cleaning 
(from the printer driver) up to 3 
times*1. 
*1: Change the paper in each 
Bottom plate cleaning. The 
cleaning can end when paper dose 
not get any soiling.   
2.If soiling on the paper still 
remains after 3 times of Bottom 
plate cleaning, wipe the platen 
rib(s) and their surroundings with 
a cotton swab. 
 
-Paper gets smeared. 
-The back side of paper 
gets smeared. 
 
7 B Print 
results 
 
Soiling on paper in 
automatic duplex 
printing (lines or 
streaks 
perpendicular to 
the paper feed 
direction) 
 
-Automatic duplex printing 
(Photo Paper Plus Double Sided, 
postcards, plain paper) 
 
On the rib(s) inside the 
sheet feed unit used for 
duplex printing, ink mist 
may accumulate, 
smearing paper. 
 
Cleaning by user: 
1. Perform Bottom plate cleaning 
(from the printer driver) up to 3 
times*1. 
*1: Change the paper in each 
Bottom plate cleaning. The 
cleaning can end when paper does 
not get any soiling. 
2. If soiling on the paper still 
remains after 3times of Bottom 
plate cleaning, wipe the platen 
rib(s) and their surroundings with 
a cotton swab.If the phenomenon 
persists after conducting 1 and 2, 
servicing is required. 
Service: 
Wipe any soiling or dirt off from 
the sheet feed unit and the bottom 
case unit ribs*2. 
 
cleaning was performed, 
and the platen ribs were 
cleaned with cotton swab, 
paper gets smeared.