Canon IP6310D 产品宣传页

Carefully remove all items from the box.

PIXMA iP6310D Photo Printer

Power Cord

Color FINE Cartridge

(CL-41)

Photo FINE Cartridge

(CL-52)

Documentation and 

Software Kit

1

    Remove the shipping tape from the front and back of the 

printer.

2

  Open (a) the card slot cover first and (b) the front cover next, 

Pull down and remove the protective material on the right 
side.

3

   Close the front cover first and the card slot cover next. 

4

    Plug the power cord into the back of the printer and connect 

the other end to a power outlet. 
Press the 

POWER button. The printer will initialize. Wait until 

the 

POWER lamp remains fully lit.

 

NOTE: Do not connect the USB cable at this stage.

5

    When the screen appears on the LCD, confirm a language 

and then press the 

OK button.

 

NOTE: 

• 

If the language you want to be displayed is not selected, refer to 
"An Unintended Language is Displayed on the LCD" in the Direct 
Printing Guide.

• 

If you leave the printer more than five minutes without using any 
button on the operation panel, the LCD goes into sleep mode 
automatically. Press the 

OK button to turn on the LCD again.

6

    Open the card slot cover first and the front cover next.

The FINE Cartridge holder automatically moves to the left.
Write down the serial number. You will need this to register 
the product.

1

  Take out the Color FINE Cartridge (CL-41) from its box and remove the protective 

tape gently.

 

NOTE: 

•

 Do not touch the electrical contacts or print head nozzles on a FINE Cartridge. The 
printer may not print out properly if you touch it.

•

 Do not reattach the protective tape once you have removed it.

•

 Handle the removed protective tape carefully to avoid getting your hands dirty or 
staining surrounding work area.

2

    Insert the Color FINE Cartridge slightly slanted into the left slot (C).

3

    Push up the Color FINE Cartridge until it clicks into place.

 

IMPORTANT:  For correct printer operation, make sure the FINE Cartridge is secure in 

slots.

4

    Repeat the procedure for the Photo FINE Cartridge (CL-52), inserting it into the 

right slot (P).

5

  Close the front cover first and the card slot cover next.

 

IMPORTANT: Wait until the preparatory operation is complete; this takes about one  
 

to two minutes.

 

The message requesting head alignment is displayed on the LCD.
Go to the next step.

1

    Open the paper support and pull out the paper output tray.

2

    Pinch the paper guide and slide it to the left. Load a few 

sheets of blank paper into the auto sheet feeder, then slide 
the paper guide toward the left edge of the paper.

 

NOTE:  Ensure that the paper thickness lever is set to the left 

position.

3

    Ensure that the message requesting head alignment is 

displayed on the LCD, select 

YES using the 

 buttons and 

press the 

OK button.

   

 The pattern is printed. And the print head is aligned 
automatically.

 

IMPORTANT:  It takes about four minutes to finish printing.

   

When automatic print head alignment can not be 
executed correctly, the message "HEAD ALIGNMENT 
ERROR

" is displayed on the LCD. refer to "An Error 

" in the Direct Printing 

Guide.

To the FINE Cartridge holder

FINE Cartridge 

holder

Paper thickness lever

Protective material

Power cord

Serial number

Protective tape

Paper support

Paper output tray

(b) Front cover

Paper guide

Print side

Auto sheet feeder

Print head nozzles

Electrical contacts

(a) Card slot cover

iP6310D_ESI_US_V1.indd   1

iP6310D_ESI_US_V1.indd   1

2006/05/09   9:54:03

2006/05/09   9:54:03