Canon W8200 用户手册
Before Using the Printer
4
1-4
d Slot
Provided for installation of either the USB 2.0 or IEEE1394 expansion
board. To install, remove the two screws. (
board. To install, remove the two screws. (
Æ Setup Guide)
e Power connector
Provides a connection point for the printer power cord.
f Media Take-up Unit connector
Provides a connection point for the power cord of the Media Take-up
Unit.
Unit.
TTop View (Inside)
a Guide rail
An important part for the movement of the carriage.
b Carriage rail
Provides the path for the carriage as it moves from side to side.
c Paper restraint
Required for media and paper output in the paper path.
d Platen
Supports the paper from below while the printhead moves from side to
side on the surface of the paper during printing.
side on the surface of the paper during printing.
e Paper release lever
Releases the media in the paper path. Upper this lever to open the paper
restraint when you need to load a cut sheet, feed a cut sheet manually, or
clean inside the printer. (
restraint when you need to load a cut sheet, feed a cut sheet manually, or
clean inside the printer. (
Æ P.2-21)
b
a
e
c
d