Canon 1016B002 用户手册
Messages regarding printheads
Messages regarding printheads
Cannot adjust printhead.
Cause
Corrective Action
The Printhead nozzles are clogged.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.623)
(→P.623)
2.
Clean the Printhead if the nozzles are clogged.
(→P.624)
(→P.624)
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.
for Printhead adjustment.
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.584)
use, other than lm, for Printhead adjustment.
(→P.584)
Cannot adjust band.
Cause
Corrective Action
The Printhead nozzles are clogged.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.623)
(→P.623)
2.
Clean the Printhead if the nozzles are clogged.
(→P.624)
(→P.624)
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.
for feed amount adjustment.
Adjust the feed amount manually.
(→P.592)
(→P.592)
x printhead needs cleaning. (x is Left or Right)
Cause
Corrective Action
The Printhead nozzles are clogged.
Specify Printhead cleaning options. (→P.624)
If the message is still displayed after you execute
Head Cleaning B two or three times, contact your
Canon dealer for assistance.
If the message is still displayed after you execute
Head Cleaning B two or three times, contact your
Canon dealer for assistance.
PHeads: wrong pos.
Cause
Corrective Action
The left Printhead is installed in the right position and
vice versa.
vice versa.
Turn off the printer and wait at least three seconds
before restoring the power. If the message is
displayed again, contact your Canon dealer for
assistance.
before restoring the power. If the message is
displayed again, contact your Canon dealer for
assistance.
706 Error Message