Xerox FS-C8008DN 用户手册
DF-31 Document Finisher
A-11
A.3.6
DF-31 Document Finisher
This multipurpose device is used for organizing printouts. The device can staple printed
sheets by electronic means and provides three output trays for stacking printed sheets after
dividing and staggering them according to print jobs.
sheets by electronic means and provides three output trays for stacking printed sheets after
dividing and staggering them according to print jobs.
The document finisher is attached to the left side of the printer as shown below. Use the
supplied dedicated bracket to attach the document finisher to the printer,
supplied dedicated bracket to attach the document finisher to the printer,
Figure A-13
A.3.7
CA-31 Casters and CA-31B Caster Kit
These casters are mounted at the bottom of the bottom feeder for moving or fixing the
printer. The CA-31 is the regular casters that may be used for the standalone FS-C8008
series printers, including only the standard PF-30A paper feeder or PD-800 duplex unit. The
CA-31B is the topple-resistant, heavy-duty caster kit. The CA-31B must be installed when
the printer is installed with one or more extra paper feeders.
printer. The CA-31 is the regular casters that may be used for the standalone FS-C8008
series printers, including only the standard PF-30A paper feeder or PD-800 duplex unit. The
CA-31B is the topple-resistant, heavy-duty caster kit. The CA-31B must be installed when
the printer is installed with one or more extra paper feeders.
Caution
The manufacturer is not liable for any damages or injuries that may be caused when the
CA-31B is not used to support the printer having more than one paper feeders.
CA-31B is not used to support the printer having more than one paper feeders.
Note
If the floor is delicate against casters, when this product is moved after installation,
the floor material may be damaged.
the floor material may be damaged.
Figure A-14
CA-31B
CA-31