Xerox FS-C8008DN 用户手册

2-7

The density of paper structure, which indicates the compactness of the fiber bonding. It is 
also the characteristic that allows air to pass through paper (i.e., air permeability).

The ability of paper to resist deformation under stress. In the printer, limp paper can buckle 
and too stiff paper can bind. Both conditions result in paper jams.

Most paper naturally tends to curl one way. To produce flat printouts, load the paper sheets 
so that the upward pressure from the printer can correct their curling. When loading paper, it 
is also important to distinguish between the front side and backside of the paper. Be sure to 
follow the paper loading instructions printed on the paper carton.

During the printing process, paper is given an electrostatic charge to attract the toner. 
Therefore, the paper must discharge the static electricity so that the printouts do not stick to 
each other in the output tray.

The contrast of printed images depends on the whiteness of the paper. Whiter paper 
produces sharper and clearer images.

Uneven paper sizes, corners that are not square, jagged paper edges, irregularly cut sheets, 
torn edges and corners, etc. can cause various printer troubles. Before purchasing paper, find 
out whether the paper store always takes measures to prevent such problems in its products.

Paper sheets should be shipped in strong cartons to protect them from damage during 
transportation. Before purchasing paper, make sure the store ships its products in proper 
packages.