Xerox DocuPrint P8ex 用户手册
Removing a SIMM
Appendix D: Adding Memory
D-3
Removing a SIMM
1
Turn off the printer and unplug the power cord. Disconnect all
cables from the back of the printer.
cables from the back of the printer.
2
Remove the two screws from the back of the control board, and pull
the control board out of the printer.
the control board out of the printer.
3
Push out on the metal clips at each end of the connector and rotate
upwards to pull the SIMM out of the connector.
upwards to pull the SIMM out of the connector.
4
Slide the control board back into the printer and fasten it with the
screws you removed in Step 2.
screws you removed in Step 2.
5
Reattach cable(s) and the power cord and turn on the printer.