Xerox 8825 用户手册

7.  Enter the number of copies desired and press the Start key.  

The Printer prints the number of sets requested. 

After the printing of the set, the set can be recalled, the values changed 
again, and the set reprinted using the new values.  To recall the set, refer 
to "Store/Recall key" in the "Special features key" section of this manual 
for further information. 

 

The Batch feature allows you to improve copy speed by enabling Batch 
Mode processing of several documents on the Scanner.  When  Batch 
Mode processing is enabled, the Scanner collects prescan information 
for just the first document inserted into the Scanner. Prescan information 
on subsequent documents in the set is not collected. The subsequent 
documents will be scanned using the information collected on the first 
document. Eliminating the collection of this information increases overall 
copy speed. 

To enable Batch Mode processing: 

1.  Press the Batch key.  The Batch indicator lamp will begin 

flashing. 

2.  Insert the first original into the Scanner.  The Scanner scans the 

original and the screen shown below is displayed. 

WIDTH FOUND FOR SET IS XX.X

 INPUT ANOTHER WIDTH OR

 PRESS ENTER TO ACCEPT

 

3.  Do one of the following: 

Use the numeric keypad to enter the width of the set and press the  Enter 
key to accept the value. 

Press the Enter key to accept the width detected by the WIDE FORMAT 
COPY SYSTEM. 

The Batch indicator lamp becomes steady and remains so until batch 
mode is disabled. 

4.  When the last document in the set has been scanned, press the 

Batch key to disable batch mode.  The Batch indicator lamp is 
extinguished.