Xerox 7755 用户手册
Introduction
WorkCentre 7755/7765/7775 Multifunction Printer
System Administrator Guide
System Administrator Guide
10
Overview
This guide is designed for a system administrator with network administrator rights who has
knowledge of networking concepts as well as experience creating and managing network user
accounts.
knowledge of networking concepts as well as experience creating and managing network user
accounts.
This guide will help you install, configure, and manage the printer on a network.
Notes:
•
Network features are not available if you are connected over USB.
•
Embedded fax features are not available for all printer models.
Configuration Steps
When configuring the printer for the first time, Xerox suggests that you follow these steps in this order:
1.
Connect an Ethernet cable from your printer to the network.
2.
Confirm that your printer is recognized on your network. By default, the printer is configured to
receive an IP address from a DHCP server over a TCP/IP network. If you have another type of
network, or want to assign a static IP address, see
receive an IP address from a DHCP server over a TCP/IP network. If you have another type of
network, or want to assign a static IP address, see
3.
Provide basic information such as your location, time zone, and date and time preferences, by
completing the Installation Wizard and the Quick Setup Home wizard. For more information, see
completing the Installation Wizard and the Quick Setup Home wizard. For more information, see
4.
Print a Configuration Report listing the printer’s current configuration. Review the report and
locate the printer’s IP address. For details, see
locate the printer’s IP address. For details, see
5.
Open a Web browser and type the IP address of your printer to access CentreWare Internet
Services (CentreWare IS). CentreWare IS is administration and configuration software installed on
the printer’s embedded Web server. For more information see
Services (CentreWare IS). CentreWare IS is administration and configuration software installed on
the printer’s embedded Web server. For more information see
Note:
Most configuration settings are located on the Properties tab in CentreWare IS. If you set
your printer to Locked in the Installation Wizard, you must log in as the system administrator. For
details, see
details, see
6.
Print the configuration checklist. The Configuration Checklist lists provides space for you to write
down important information as you go through the configuration process. Use it to record
information about your network settings, including passwords, network paths, and server
addresses. For details, see
down important information as you go through the configuration process. Use it to record
information about your network settings, including passwords, network paths, and server
addresses. For details, see
7.
Configure Authentication. For details, see
8.
Configure Security. For details, see
9.
Enable services in CentreWare IS. For details, see
10. Configure Print, Scan, and Fax features. For details, see
11. Configure Accounting. For details, see